DTF Transfer Halftone - Steampunk Rabbit with Glowing Goggles - Prints Best on Darks

Prints best on black or dark garments.

A white rabbit wearing mechanical orange goggles and a detailed hooded jacket, holding a steaming canister amid curling smoke. Recommended for black or dark garments.

This listing is for one physical, ready-to-press DTF heat transfer. A garment and digital download are not included.

Available Sizes

• Single Adult Transfer: 10–11 inches tall
• Jumbo Design: 14–15 inches tall
• Single Youth Transfer: 6 inches tall

Artwork proportions are maintained. Pocket size is not offered.

DTF Transfer Application Instructions

1. Lay your garment flat and pre-press briefly to remove moisture and wrinkles.
2. Position the transfer with its adhesive/white side against the fabric and carrier film facing up.
3. Press at 310°F for 8 seconds using heavy, even pressure.
4. Peel immediately, pulling the carrier quickly, low and close to the garment.
5. Cover with a clean Teflon sheet and press again for 4 seconds.

Use a commercial heat press and test your fabric first. Follow the garment manufacturer's heat limits.

Washing & Care

Wait at least 24 hours before washing. Turn inside out, wash cold with mild detergent, and hang dry or tumble dry low. Avoid bleach, fabric softener, dry cleaning and ironing directly on the print.

Read our full DTF Pressing & Washing Guide.